Lyngdorf Audio Millenium ADC Analog/Digital Converter - Manual (Page 20)

2 0
Digital outputs
Parameter Value Note
Balanced output connector 3 pin XLR male, gold-plated Case=Gnd, Pin1=Gnd,
Pin2=Hot(+), Pin3=Cold(-)
Balanced output impedance 110 ohms Transformer isolated output.
Balanced output voltage 1.7Vpp With 110 Ohm load.
Balanced output jitter 350pS With 110 Ohm load
Unbalanced output connector RCA (phono) jack, gold-plated. Case=Gnd, Tip=Hot(+)
Unbalanced output impedance 75 ohms Transformer isolated output.
Unbalanced output voltage 0.5Vpp With 75 ohms load.
Unbalanced output jitter 400pS With 75 ohms load
Optical output connector Toslink
Optical output jitter 350pS
Output sample rate 48, 96, 192 kHz
Output protocol SPDIF, Toslink (consumer), AES/
EBU (professional)
Mains
Parameter Value Note
Mains input connector IEC 320
Mains voltage range 110-120 V AC, 50–60 Hz
Mains voltage range 220-240 V AC, 50-60 Hz
Internal mains fuse 1 Amp
Power consumption 1.5W STANDBY mode.
Power consumption 50W OPERATE mode, no output.
Mechanical
Parameter Value Note
Width 450 mm (17.72”)
Depth 430 mm (16.9”) Including connectors.
Height 145 mm (57”) Including feet.
Net weight 12.9 kg (28.4lb)
Shipping weight 17.2 kg (37.9lb)