LG CINEMA 3D MONITOR D2342P - Manual (Page 15)

15
ENG
ENGLISH
CUSTOMIZING SETTINGS
SUPER ENERGY SAVING Settings
1 Press any button on the front of the Monitor set to
display the MONITOR SETUP OSD menu.
2 Press the MENU button to display the options in the
OSD menu.
3 Select SUPER ENERGY SAVING by pressing the
buttons on the front of the Monitor set and set the
options.
4 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
The available picture settings are described below.
Menu Description
ON Enables SUPER ENERGY SAVING you can save energy with this energy-efficient function.
OFF Disables SUPER ENERGY SAVING.
RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates.
y y TOTAL POWER REDUCTION: How much power is saved while using the monitor.
y y TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
y y SAVING DATA(W/h)
584 mm (23 inch)
SUPER SAVING 5 W/h
LED SAVING 12 W/h
y y Saving Data depends on the Panel. So,those values should be different from each panel and panel
vendor.
y y LG calculated these values by using “broadcast video signal”.
y y LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel.
y y SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
function.
NOTE
EXIT OK
ON OFF RESET
TOTAL POWER REDUCTION: 20 W
TOTAL CO2 REDUCTION:
16 g
SUPER
SAVING
: 5 W/h
LED
SAVING
: 12 W/h
SUPER ENERGY SAVING
ENG.indd 15 2011-04-05 �� 1:20:42