Linksys PAP2-VU - Manual (Page 18)

Phone Adapter with 2 Ports for Voice-over-IP
13 Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Set Static Gateway IP
Address 131 Enter the IP
address using
numbers on the
telephone keypad.
Use the * (star) key
when entering a
decimal point. To set a static gateway IP address, the
DHCP feature must be disabled. If the
DHCP feature is enabled, then you will
hear, “Invalid Option,” if you try to set
a static gateway IP address.
Check MAC Address 140 You will hear the MAC address of the
Phone Adapter in hexadecimal string
format.
Check Firmware
Version 150 You will hear the version number of
the firmware currently installed on the
Phone Adapter.
Manual Reboot 732668 After you hear, “Option successful,”
hang up the phone. The Phone
Adapter will automatically reboot.
Interactive Voice Response Menu
Action Command
(press these
keys on the
telephone) Choices Description