LG LFD750 User Manual

Page 14

AUDIO

Each DVD disc has a variety of audio output options.
Set the unit’s AUDIO options according to the type of
audio system you use.

Dynamic Range Control (DRC)

With the DVD*

format, you can hear a program’s

soundtrack in the most accurate and realistic
presentation, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). Then, you may
listen to a movie at a lower volume without losing
clarity of sound. Set DRC to On for this effect.
*1: Dolby Digital only

Vocal

Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.

LOCK (Parental Control)

Rating

Blocks playback of rated DVDs based on their
contents. Not all discs are rated.

1. Select “Rating” on the LOCK menu then

press B.

2. To access the LOCK options, you must input the

password you have created. If you have not yet
entered password, you are prompted to do so.

Input a password and press SELECT/ENTER.
Enter it again and press SELECT/ENTER to verify.
If you make a mistake before pressing
SELECT/ENTER, press CLEAR.

3. Select a rating from 1 to 8 using v / V.

Rating 1-8: Rating one (1) has the most

restrictions and rating eight (8) is the
least restrictive.

Unlock: If you select unlock, parental control is

not active and the disc plays in full.

4. Press SELECT/ENTER to confirm your rating

selection, then press SETUP to exit the menu.

Password

You can enter or change password.

1. Select “Password” on the LOCK menu and then

press B.

2. Follow the step 2 as shown above (Rating).

To change the password, press SELECT/ENTER
when the “Change” option is highlighted. Input a
password and press SELECT/ENTER. Enter it
again and press SELECT/ENTER to verify.

3. Press SETUP to exit the menu.

If you forget your password

If you forget your password, you can clear it using the
following steps:

1. Press SETUP to display the Setup menu.

2. Input the 6-digit number “210499” and press

SELECT/ENTER. The password is cleared.

Area Code

Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 25.

1. Select “Area Code” on the LOCK menu then

press B.

2. Follow step 2 as shown in rating section.

3. Select the first character using v / V.

4. Press B and select the second character using

/ V.

5. Press SELECT/ENTER to confirm your Area code

selection.