Linn BASIK - Manual (Page 5)

SITING
Ensure the surface on which the turntable is to be used is level. For best results we recommend the following:-
FLOOR MOUNTING Place deck on a small, light, rigid table e.g. small coffee table. Ensure the table is
sitting firmly on the floor and not rocking.
WALL MOUNTING Wall mounting may be preferable where a highly sprung floor exists or where there is
risk of damage by children. The shelf used should be light and rigid, and it should be fully supported by, but not
firmly screwed or glued to its brackets.
To allow the lid to open fully, a clearance of 3" (7.5cm) is required behind the plinth and at least 13" (33cm)
above
Fit the arm cable to the arm pillar taking care to push it all the way home. The connector may be locked in place
with the small Alien screw on the side of the pillar (don't over-tighten). Ensure that neither the mains cable
nor the arm lead are under tension or interfere with the feet as this will prevent the suspension from working
correctly.