Level 1 level 2 level 3 / function – Sony KV-29LS35K User Manual

Page 14

Menu System

NOISE REDUCTION
The “Noise Reduction” option in the “Detail Set
Up” menu allows you to automatically reduce
the picture noise visible in the broadcast signal.

To do this: after selecting the option, press

Then press

to select Auto. Finally

press OK to confirm and store.

To cancel this function afterwards, select “Off”
instead of “Auto” in the step above.

AV2 OUTPUT
The “AV2 Output” option in the “Detail Set
Up” menu allows you to select the source to be
output from the Scart connector

:2/q

order you can record from this Scart any signal
coming from the TV or from an external
equipment connected to the Scart connector

:1/

or side connectors

3 and

If your VCR supports Smartlink, this
procedure is not necessary.

To do this: after selecting the option, press

Then press

to select the desired

output signal: TV, AV1, AV3, YC3 or AUTO.

If you select “AUTO”, the output signal
will always be the same one that is
displayed on the screen.

If you have connected a decoder to the
Scart

:2/q

or to a VCR connected to

this Scart, please remember to change back
the “AV2 Output” to “AUTO” or “TV” for
correct unscrambling.

Level 1

Level 2

Level 3 / Function

Picture Adjustment

Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Noise Reduction:

AV2 Output:

RGB Centring:

Picture Rotation:

Auto
TV
0
0

continued...