Life Fitness 887 - Manual (Page 12)

12
STEP 11:
FIGURE 11
• Loop the 121-3/4” CABLE (12) around one 3-1/2” PULLEY (9) as shown in FIGURE 11.
• LOOSELY assemble the 3-1/2” PULLEY (9) to the 3/16 X 1-3/4 X 5-1/4” PLATES (23) using one 3/8 X 2” BOLT (35), two 3/8” WASHERS
(30), and one 3/8” LOCK NUT (31). See FIGURE 11.
• SECURELY thread the end of the 121-3/4” CABLE (12) 3/4 of the way into into the threaded housing on the UPRIGHT and SE-
CURELY tighten jam nut.
35 3/8 X ”
30
23
9
31
UPRIGHT
12
SECURELY
TIGHTEN
JAM NUT!
THREADED END
• SECURELY tighten the two 3/8 X 2” BOLTS (35) of the 3/16 X 1-3/4 X 5-1/4” PLATES (23).