Kenwood KDW4TTSL - Manual (Page 10)

COMMON DISHWASHING PROBLEMS AND SOLUTIONS
PROBLEM
POSSIBLE CAUSE POSSIBLE SOLUTION
Dishwasher will not start * Dishwasher not receiving * Check electrical connection
Electrical power. Fuse/circuit breaker.
* Door is unlatched. * Close and latch door.
* Dishwasher not level. * Level unit.
Dishes not clean
* Improper loading * Arrange dishes so spray action
reaches all surfaces.
* Do not overload dishwasher.
* Spray arm not rotating freely * Check spray arm to make sure
nothing (i.e. cutlery) is
obstructing spray arm rotation.
* Check if filter screen has become
dislodged and obstructing spray
arm rotation.
* Not enough detergent and/or * Use more dishwasher detergent
improper detergent being used . * Do not use detergent that is old
or lumpy.
* Use only a recommended
dishwasher detergent.
* Improperly prepared dishes. * Excess food soil and liquids
should be removed from dishes
before loading.
* Water inlet hose kinked/bent * Eliminate kink or bend from
due to improper installation. Inlet hose.
*The filter lose its position * Assure the filter in its right position
Chipping or breaking
* Improper loading of dishes. * Do not overload dish rack. Load
glassware g lasses on the bottom rack only,
Water remains in bottom * A small amount of water * This is necessary to keep the
(in sump area) is normal. pump primed and is drained
automatically at the beginning
of each cycle.
* Excessive amount of water; * Allow dishwasher to complete
cycle not completed. full cycle.
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at the end of its life separately from your household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you
purchased the product.
9