Options specifications, Applicable mil-std & ip, Kmc-9b – Kenwood FleetSync TK-5710(H) User Manual
Page 2: Kmc-27, Kmc-28, Kct-18, Kct-22, Kct-23, Kes-5, Kch-14
■
KMC-9B
Desktop Microphone
■
KMC-27
Microphone
(MIL-SPEC noise-canceling)
■
KMC-28
Keypad Microphone
(MIL-SPEC noise-canceling)
■
KCT-18
Ignition Sense Cable
■
KCT-22
Remote Control Cable
■
KCT-23
DC Power Cable
■
KES-5
External Speaker (20W)
■
KCH-14
Basic Remote
Control Head
■
KCH-15
Full-Featured Remote
Control Head
■
KRK-5
Single Control Head Remote Kit
■
KRK-6DH
Dual Control Head Remote Kit
■
KPG-94
Keyloader Interface Cable
■
VGS-1
Voice Guide & Storage Unit
Applicable MIL-STD & IP
ADS#43807 Printed in USA
JQA-QMA1205
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete
list of all accessories and options.
Options
Specifications
Model
TK-5710
TK-5710H
TK-5810
TK-5810H
GENERAL
Frequency Range
Type 1
136-174 MHz
450-520 MHz
Type 2
400-470 MHz
Number of Channels
512
Zones
50
Max. Channels per Zone
250
Channel Spacing
Analog
12.5 / 15 / 20 / 25 / 30 kHz
12.5 / 25 kHz
Digital
12.5 kHz
Operating Voltage
13.6V DC ± 15%
13.4V DC ± 15%
13.6V DC ± 15%
13.4V DC ± 15%
Current Drain
Standby
Less than 0.6A
Receive
Less than 2.3A
Transmit
Less than 12A
Less than 25A
Less than 14A
Less than 28A
Duty Cycle
Transmit: 20%
Operating Temperature Range
-22 ˚F to +140 ˚F (-30 ˚C to +60 ºC)
Frequency Stability
± 2.0 ppm (-22 ˚F to +140 ˚F)
Antenna Impedance
50
Ω
Dimensions (W x H x D)
RF Deck only
7.01 x 2.36 x 7.68 in.
7.01 x 2.36 x 12.87 in.
7.01 x 2.36 x 7.68 in.
7.01 x 2.36 x 12.87 in.
(178 x 60 x 195 mm) (178 x 60 x 327 mm)
(178 x 60 x 195 mm)
(178 x 60 x 327 mm)
with KCH-14 or15 7.05 x 2.36 x 9.09 in. 7.05 x 2.36 x 14.29 in.
7.05 x 2.36 x 9.09 in.
7.05 x 2.36 x 14.29 in.
(179 x 60 x 231 mm) (179 x 60 x 363 mm) (179 x 60 x 231 mm)
(179 x 60 x 363 mm)
Weight RF Deck only
5.3 lbs. (2.4 kg) 8.6 lbs. (3.9 kg)
5.5 lbs. (2.5 kg)
9.2 lbs. (4.2 kg)
with KCH-14
5.9 lbs. (2.7 kg) 9.2 lbs. (4.2 kg)
6.2 lbs. (2.8 kg)
9.9 lbs. (4.5 kg)
with KCH-15
5.9 lbs. (2.7 kg) 9.2 lbs. (4.2 kg)
6.2 lbs. (2.8 kg)
9.9 lbs. (4.5 kg)
FCC ID
Type 1
K4435753110 K4435753210
K4439923110
K4439923210
Type 2
K4439923120
K4439923220
IC Certification
Type 1 282F-35753110
Type 2
282F-39923120
RECEIVER (Measurements made per EIA/TIA-204-D)
Sensitivity
Digital (5% BER)
0.25 µV
Digital (1% BER)
0.40 µV
Analog 12 dB SINAD
0.25 µV
Selectivity
Digital
-63 dB
Analog @ 25/30 kHz
-83 dB / -85 dB
-83 dB / -
Analog @12.5/15 kHz
-76 dB / -80 dB
-76 dB / -
Intermodulation Distortion (Digital & Analog)
-80 dB
Spurious Response (Digital & Analog)
-90 dB
Audio Distortion
Digital
Less than 1.0%
Analog
Less than 2.0%
Audio Output
Internal (KCH-14)
@3%
1.5 W at 8
Ω
@5%
1.625 W at 8
Ω
External
@3%
12 W at 4
Ω
@5%
13 W at 4
Ω
TRANSMITTER (Measurements made per EIA/TIA-152-C)
RF Output Power
50 W to 5 W
110 W to 50 W
45 W to 5 W
100 W to 50 W
*2
Spurious & Harmonics
80 dB
FM Hum & Noise
Analog @ 25 kHz
50 (53)
*1
dB
50 dB
Analog @12.5 kHz
45 (47)
*1
dB
45 dB
Microphone Impedance
600
Ω
Audio Distortion
Less than 2%
Modulation
16K0F3E, 11K0F3E, 8K10F1E, 8K10F1D
20K0F7D, 11K2F7D, 14K4F1D, 7K20F1D
8ft./17ft./25ft.
footnotes from Front:
1
Intercom: Dual Head capable remote mounts only.
2
KCT-18 ignition sense cable option required.
3
DB-25 ACC: I/O's for dispatch consoles, desktop remotes, vehicle
intercom/PA units, motorcycle PTT/headset kits, PC Laptop /Data
Modems, GPS/AVL Modems; DB-25 (9 Prog. AUX I/O's & 2 Prog.
AUX Outputs); 1 Prog Input (on Control Head).
4
KPG-95D Software required (Windows 98/ NT/ 2000/ Me/XP
compatible).
5
Easy Option Ports: VGS-1, ANI & Scrambler board ports; only 2
ports can be used simultaneously.
6
P25 Trunking option required.
7
Two-Tone: Decode (4 sets x 4 pairs each); Encode: 32 pairs;
Operator Selectable Tone (40 QT.DQT code pairs).
8
DTMF Encode: PTT ID, Emergency ANI, Manual Encode (KMC-28),
Auto-Dial (9 numbers); DTMF Decode: Primary/secondary ID, Stun
(a.k.a. dead beat disable).
9
Operates for 2-Tone, DTMF, FleetSync selective calling.
10
FleetSync & FleetSync II are not compatible.
11
Feature/Option added to the TK-5710 Version 2 radios (SN
80600001 or later).
12
KPG-94 adapts the Motorola‚ KVL3000/3000 Plus Key Loader to
the TK-5710/5810.
(*1) 148MHz ~ 168MHz
(*2) Type 1: 100W to 50W for 450-500MHz. More than 60W to 50W
for 500-520MHz.
Type 2: 100W to 50W for 400-470MHz.
Analog measurements made per TIA/EIA 603
Digital measurements made per TIA/EIA 102CAAA
FleetSync® is a registered trademark of Kenwood Corporation.
Windows® is a registered trademark of Microsoft Corporation in the United States
and other countries.
IMBE
TM
is a trademark of Digital Voice Systems Inc.
The P25 Logo is used under license and is a registered trademark of the Project 25
Technology Interest Group.
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
Standard
MIL 810C
MIL 810D
MIL 810E
MIL 810F
Methods/Procedures Methods/Procedures
Methods/Procedures
Methods/Procedures
Low Pressure
500.1/Procedure I
500.2/Procedure I, II
500.3/Procedure I, II
500.4/Procedure I, II
High Temperature
501.1/Procedure I, II
501.2/Procedure I, II Cat.A1
501.3/Procedure I, II Cat.A1
501.4/Procedure I, II
Low Temperature
502.1/Procedure I
502.2/Procedure I, II Cat.C1
502.3/Procedure I, II Cat.C1 502.4/Procedure I, II
Temperature Shock
503.1/Procedure I
503.2/Procedure I Cat.A1,C1
503.3/Procedure I Cat.A1,C1 503.4/Procedure I, II
Solar Radiation
505.1/Procedure I
505.2/Procedure I
505.3/Procedure I
505.4/Procedure I
Rain
506.1/Procedure I, II
506.2/Procedure I,II
506.3/Procedure I, II
506.4/Procedure I, III
Humidity
507.1/Procedure II
507.2/Procedure II
507.3/Procedure II
507.4
Salt Fog
509.1/Procedure I
509.2/Procedure I
509.3/Procedure I
509.4
Dust
510.1/Procedure I
510.2/Procedure I, II
510.3/Procedure I
510.4/Procedure I, III
Vibration
514.2/Procedure VIII, X
514.3/Procedure I Cat.8,II Cat.3 514.4/Procedure I Cat.8,II Cat.3 514.5/Procedure I Cat.20,II Cat.5
Shock
516.2/Procedure I, II, III, V
516.3/Procedure I, IV, V, VI
516.4/Procedure I, IV, V, VI
516.5/Procedure I, IV, V, VI
International Protection Standard
Dust & Water Protection
IP54