Konica Minolta Vectis 300 - Manual (Page 29)

54 55
TITLE IMPRINTING - Filmstrip Title
An additional title for the entire roll of film can be selected. Both the
filmstrip title and the frame title will be printed on the back of the print.
1. With the camera on, press the title
button to display the desired filmstrip
title.
• Each press of the title button changes the title
code to the next selection.
2. Press the shutter release button all-the-way down to set
the title.
• The camera advances to write the data on the film’s leader, then
rewinds the film.
3. When blinks in the data panel again, turn the film-
chamber release and remove the film.
• Set the filmstrip title before removing the film.
✎ Once a filmstrip title is set, it can not be changed or cancelled using the
camera.
After the film has been rewound and
blinks in the data panel: