Karcher K 2.27 - Manual (Page 9)

English 9
 STEP 1:
Turn the switch to OFF (0) position
and unplug cord from outlet.
 STEP 2:
Turn off the water source.
 STEP 3:
Press trigger to release water pres-
sure.
 STEP 4:
Release trigger and engage gun
safety lock.
 STEP 5:
Disconnect the garden hose from the
water inlet on the unit.
ṇ CAUTION
When disconnecting the supply or high
pressure hose, warm water may leak
from the connector after operation.
 STEP 6:
Disconnect the high pressure hose
from the high pressure outlet.
1 Disconnect all water connections.
2 Turn on the machine for a few sec-
onds, until the water which had re-
mained in the pump exits, turn off
immediately.
3 Do not allow high pressure hose to
become kinked.
4 Store the machine and accessories in
a room which does not reach freezing
temperatures. DO NOT store near
furnace or other sources of heat as it
may dry out the pump seals.
ṇ CAUTION
Failure to follow the above directions will
result in damage to the pump assembly
and accessories and will void the warranty.
Kärcher
® also recommends the regular
practice of using a pump protector like
“Kärcher
® Pump Guard” to prevent cold
weather damage during storage in the
winter months.
SHUTTING DOWN
& CLEAN-UP
WINTERIZING AND LONG-
TERM STORAGE