Kettler 8411-182 - Manual (Page 3)

■ Replace worn or damaged parts immediately and ensure that the product is not used again until
this has been done. If any parts require replacement, use only original spares manufactured
by KETTLER®.
Use of the Toy
■ Ensure that the toy is not used until it has been properly assembled and checked by an
adult person.
■ Instruct your child how to use the wheelbarrow correctly and draw attention to possible sources of
danger.
■ Although dangerous situations are unlikely to occur if the wheelbarrow is used correctly, children at
play should, if possible, be supervised.
■ When children are at play, situations may arise which cannot be predicted by the manufacturer
and for which he cannot be held responsible.
■ Keep this unit clean and dry. Wipe off dirt, moisture, and oil with a clean soft cloth. Never use
corrosive or abrasive substances to clean the toy. Never use substances which may cause
pollution of the environment.
Assembly of the wheelbarrow
■ Please ensure that the wheelbarrow will only be used for playing when assembly has been carried
out correctly, and checked, by an adult.
■ The toy must be assembled carefully by an adult person. Study the assembly instructions
carefully before beginning work. This is essential for the safe function and use of the
wheelbarrow.
■ Please note that there is always a danger of injury when working with tools or doing manual
work. Therefore please be careful when assembling this product.
■ Ensure that your working area is free of possible sources of danger, for example don’t leave any
tools lying around. Always dispose packaging material in such a way that it may not cause any
danger. There is always a risk of suffocation if children play with plastic bags!
■ Bolt all the parts together loosely at first, and check that they have been assembled correctly.
Tighten the locknuts by hand until resistance is felt, then use wrench to finally tighten nuts
completely against resistance (locking device). Then check that all screw connections have been
tightened firmly. Attention: once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be replaced.
■ Please keep original packaging of this article, so that it may be used for transport at a later date,
if necessary.
■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition
of tubing plugs).
List of spare parts page 7
When ordering spare parts, always state the full article number, spare‐part number, and the quantity
required.
Example order: Model # 8427‐182/ spare‐part no. 8427‐182#01 / 1 piece
Please keep original packaging of this article, so that it may be used for transport at a later date, if
necessary. Goods may only be returned after prior arrangement and in (internal) packaging, which
is safe for transportation, in the original box if possible.
3