Kodak DVD7000 - Manual (Page 14)

13
Basic Operation
Basic Playback
Preparation before playing:
1. Connect your DVD player to the TV and amplifier.
2. Turn on the TV.
3. Set the TV to the AV input connected to the DVD Player.
4. Turn down the volume on your amplifier, then power it on.
5. Set the amplifier to the AV input connected to the DVD Player.
Step 3 - Press the PLAY
button on the front panel or
remote control. The player
will automatically read and
identify the disc, display the
type and total time, and begin
playback.
Step 2 - Press OPEN/CLOSE
on front panel or remote control.
The player displays "OPEN" on the
display. When the tray is open, place
the disc on the tray, with the label side
up. Press OPEN/CLOSE again to close
the disc tray.
Step 1 - Press the POWER
switch, the player will start.
Then "LOAD" is illuminated
on the display and the logo is
displayed on TV screen.