Getting started, Unpacking – Klipsch Palladium P-27C User Manual
Page 4

Page 4
Getting Started
Unpacking
(P-38F / P-37F)
Please follow the unpacking instructions fully and in the order shown below. These loudspeakers are
heavy! Do not lift or move these speakers by yourself. Always have someone help you.
1
3
5
4
2
Open the carton flaps
Lightly tape each flap to the box
with short pieces of tape
Remove the top packing piece
Carefully invert the carton
Lift off the carton
Lift off the center and base packing pieces
The loudspeaker is
ready for connection
• The grille box contains: one upper grille; one lower grille, (P-38F / P-37F) or one single-piece grille
(P-17B, P-27C and P-27S)
• The Accessories box for P-38F and P-37F contain: four long spikes; four short spikes; four spike col-
lars; four spike seats; one Allen wrench.
• The Accessories box for P-27C contains: two short front spikes; one short-barrel rear spike; one
long-barrel rear spike; three spike collars; three spike seats; one Allen wrench.
• The P-17B and P-27S do not have an accessory box, but do include an Allen wrench with the
owner’s manual packet.
• There is a pair of gloves located in a pocket in the side of the packing carton under the Owner’s manual.
Identify all the components. If any item is missing or damaged, report this immediately to your Klipsch
dealer and the transport contractor for action.
What’s in the box?
Remove the Grille box
Remove the Accessories box
Remove the Owner’s manual
and gloves