Step 1, Assembly – Keys Fitness KF-HCS User Manual

Page 6

STEP 1

Slide Linear Bearing (8), Clip, (9), Rubber Spacer (3), and

Plug onto Weight Support.

Slide Weight Support (1), Round Bumper (4) and Safety

Slide (4) onto Rod (7) in the order shown. Secure Right

Safety Hook (6) to Safety Slide (4) using Bolt (14),

Washers (16) and Nylon Lock Nut (15). Repeat for Left

Side using Left Safety Hook (5).

Slide Rubber Bumper (5) onto bottom of left side assem-

bly. Repeat for Right Side.

NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.

Assembly