Flash/status screen, Storing pictures on an sd or mmc card – Kodak CX7525 User Manual
Page 13
Getting started
www.kodak.com/go/support
7
Flash/Status screen
Press the Flash/Status button. The current camera status icons are displayed in
the bottom half of the Flash screen.
Storing pictures on an SD or MMC card
Your camera has 16 MB of internal memory. You can purchase optional SD or
MMC cards for removable, reusable storage for your pictures and videos.
NOTE: We recommend Kodak SD or MMC cards. Other SD brands are acceptable, but must
possess the SD
logo. (The SD logo is a trademark of the SD Card Association.) When
using the card for the first time, format it in this camera before taking pictures (see
).
CAUTION:
The card can only be inserted one way; forcing it may
damage the camera or card.
Do not insert or remove a card when the green ready light
is blinking; doing so may damage your pictures, card, or
camera.
To insert an SD or MMC card:
1 Turn off the camera.
2 Open the card door.
3 Orient the card as shown on the camera body.
4 Push the card into the slot to seat the
connector.
5 Close the door.
To remove the card, turn off the camera. Push the card in, then release it.
When the card is partially ejected, pull it out.
See
for storage capacities. Purchase SD or MMC cards at a dealer of
Kodak products or
Other settings
Notched
corner