KoldFront PAC8000S - Manual (Page 14)

11
Using the Control Panel
The LCD Display will show the ambient temperature by default.
Pressing the Up and Down buttons on the remote control will show
the set temperature for 15 seconds, and then revert to the room
temperature. You can switch between Fahrenheit and Celsius by
pressing the C/F button on the remote control. The displayed range
of the ambient temperature is from 0º to 99º. Temperatures above
99º will be displayed as “Hi”, and temperatures below 0º will be
displayed as “Lo”. If you enabled the Timer, the LCD Display will
show the hour(s) set.
The Mode indicator light on the control panel changes color to
indicate the mode you selected with the remote control:
• Blue light: The unit is in cooling mode.
• Amber light: The unit is in dehumidifying mode.
• Green light: The unit is in fan mode.
Use the Power button to turn the portable air conditioner on and off.
By default when you first use the power button, the unit will begin to
operate in cooling mode. The unit will remember the last used
mode/settings if you shut down and restart.
Auto-Restart: If power to the unit is interrupted, the air conditioner
will restart itself in its last used mode/settings once power is
restored. The compressor will restart after 3 minutes.
In high humidity situations, the internal water reservoir may fill. The
unit will automatically shut off and the water light will turn on. Once
the water is manually drained, the unit will operate normally.
The remote control sensor receives infrared signals given by the
remote control.
LCD Display
Mode Indicator Light
Power Button
Water Full Light
Remote Control Sensor