Hd view 8, Operating instructions, General information – Key Digital KD-RGBDA8 User Manual
Page 4: Signal properties, Input, Loop through, Outputs, Page 4 of 8

General Information
•
Enables RGBHV signal distribution from any HDTV multimedia or computer source to VGA-
based monitors
•
Many formats accepted: all SD and HD formats: 480i, 480p, 720p, 1080i/540p and VESA-
based PC formats: from 640x480 to 1600x1200
•
Refresh rates 50 Hz to 80 Hz
•
One unit can drive up to 8 monitors
•
The HD View 8
TM
can be cascaded to other HD View 8
TM
units to drive as many outputs as
desired from one source
•
Each output can drive up to 300 feet each with equal-length VGA cables
Signal Properties
•
RGB Video
•
Bandwidth -3 dB at 300 MHz, linear-phase passband
•
Unity-gain, 0.7 volt p-p, terminated to 75 ohms
•
H and V sync TTL type 5 volts p-p
Input
•
One DB15 VGA connector for connecting the “source” signal to the HD View 8
TM
for
distribution to the output.
Loop Through
•
One DB15 VGA connector for connecting the “source” signal to an additional HD View 8
TM
for distribution to additional video displays.
Outputs
•
Eight DB15 female connector for connecting the HD View 8
TM
to the outputs.
The Experts in Digital Video Technology and Solutions.
The Experts in Digital Video Technology and Solutions.
HD View 8
TM
Operating Instructions
Page 4 of 8