Kawai CL25 - Manual (Page 22)

– 22 –
or personal computer to create performances with a variety of timbres.
The term “Multi-Timbral” is derived from the ability to play multiple
timbres simultaneously.
NOTE:
You can assign any sound of the CL25 piano to any channel in the way
you like by sending the correct Program Change Number to the CL25
piano from an external MIDI device. Please refer to the list below for
assignment of sound and program number.
(1) Press the “MULTI” key while holding down the METRONOME
and CONCERT MAGIC buttons.
(2) While still holding down the METRONOME and CONCERT
MAGIC buttons, pressing the “off” key sets the Multi-Timbral mode
to “off”. If you press the “on” key, this function returns to “on”.
Sound Multi-Timbre “on” Multi-Timbre “off”
Program # Bank MSB Bank LSB
Concert Grand 1 121 0 1
Modern Piano 2 121 0 2
Electric Piano 5 121 0 3
Church Organ 20 121 0 4
Harpsichord 7 121 0 5
Vibraphone 12 121 0 6
Strings 49 121 0 7
Choir 53 121 0 8
9. TRANSMIT MIDI PROGRAM CHANGE
You can set whether the CL25 piano should transmit Program Change
Numbers via MIDI when the sound is changed on the control panel.
(1) Press the “PROGRAM” key while holding down the
METRONOME and CONCERT MAGIC buttons.
(2) While still holding down the METRONOME and CONCERT
MAGIC buttons, pressing the “off” key sets the CL25 piano to not
transmit the program change data corresponding to the sound selected
on the panel. If you press the “on” key, this function returns to the
“on” setting and selecting a sound will transmit the data.
(3) You can also transmit the desired program change number directly