Kodak P730M - Manual (Page 13)

Getting started
www.kodak.com/go/support 7
3 Set the clock.
Tap the down arrow to highlight Clock, then
slide or tap between the left/right arrow lights to
select the current time (based on a 24-hour clock).
4 Set the date.
Tap the down arrow to highlight
Year/Month/Day, then slide or tap between the
left/right arrow lights to select the current date
(three separate settings).
5 Set your automatic on and off times.
Specify the times you want your frame to automatically turn on and off.
NOTE: Make sure the on time is earlier than the off time.
a Tap the down arrow to highlight Auto Off Auto On, then tap OK to change
the option to Enabled.
b Tap the down arrow to highlight Turn Frame On At, then slide or tap between
the left/right arrow lights to select the On time (based on a 24-hour clock).
c Tap the down arrow to highlight Turn Frame Off At, then slide or tap between
the left/right arrow lights to select the Off time (based on a 24-hour clock).
6 Tap OK to save your selections.
If your frame loses power (for more than 12 hours), the clock time returns to the
factory setting and the automatic on/off times, if set, are disabled. To reset the clock
and re-enable your on/off times, see
Resetting the clock after losing power, page 33 .
Press and hold to move quickly
through the time and date
settings.
Slide between the arrow lights.