Vitek VT-5010 SR - Manual (Page 6)

SETUP YOUR TV
Press the Menu button to enter setup menu:
PICTURE
Adjust the image quality.
Press the CH button to choose the mode: CONTRAST,
BRIGHT, COLOR, SHARP.
Then use the VOL+ and VOL buttons to adjust the image
quality; increase (V+) or decrease (V ) the parameters.
OPTION
Press the CH button to choose the mode: LANGUAGE, CAL
ENDAR, GAME
LANGUAGE
Using the VOL+ and VOL buttons you can choose the menu
language: English, Italian, Spanish, Portugal, German,
Arabic, Chinese or Russian.
CALENDAR
Using the VOL+ and VOL buttons enter the "calendar"
menu. Press the CH buttons to choose the year, press VOL
buttons to choose month. Press the POWER button to exit
the calendar.
GAME
Using the VOL+ and VOL buttons enter the "game" menu.
To control the figures, use VOL (move left), VOL+ (move
right), CH (speed up) and CH+ (rotate 360°). Press the
POWER button to exit the game.
CLOCK
Press the CH button to choose the mode: Time, On Time, Off
time, Attention, Channel time, Position. Use the VOL button
to set the hours and the VOL+ button to set the minutes.
Note: set the current time first and then the other parame
ters.
SYSTEM
Adjust the display system.
Press the CH buttons, choose the mode: Color system,
Sound system, Blue background, Picture mode.
Use the VOL+ and VOL buttons to choose the sound best
suited for the current channel.
Using the VOL+ and VOL buttons you can turn the blue
background on/off when there is no signal.
Press the CH button to choose one of Picture mode param
eters:
Horizontal, Vertical, Zoom. Then use the VOL+ and VOL but
tons to set the desired parameters for each menu item.
PRESET
Use the CH button to choose one of these parameters:
Program number (Position), Remember, Band, Swap, Fine
Tuning, Search, Auto search. Then use the VOL+ and VOL
buttons to set the desired parameters according to each
menu item.
USING YOUR TV
Connect the television to the AC power supply and press the
POWER button in order to turn on the television. Extend the
antenna fully and point it in the needed direction. Choose
the desired channel using the CH
#/CH$ buttons or
numerical keys on the remote control unit. Set the desired
volume using the VOL+
# /VOL $ buttons.
Change the length, angle and direction of the antenna in
order to achieve better image quality.
Note
• Use an external antenna in areas with poor signal recep
tion.
• Stow the antenna after turning off the television.
USING AN EXTERNAL ANTENNA
For best signal reception, connect the television to an exter
nal antenna suing the antenna adapter.
LISTENING WITH HEADPHONES
Headphones (3.5 mm) connect to the jack located on the
backside panel of the television.
MALFUNCTIONS AND SOLUTIONS
Carryout the following recommendations before contacting
a service center.
Condition Cause of malfunction
No image or sound • The power cord is incorrectly con
nected
• The television is off
No image • The channel is not tuned properly
No sound • The volume is not set correctly
•The headphones are not connected
• Weak signal
The image is too dark • The brightness and contrast are
not set correctly
Fuzzy image or • The antenna is not positioned
"snow like" static correctly
• The television is located near
a building, high voltage lines,
construction site, neon light or trains
ENGLISH
6
5010.qxd 14.06.05 10:24 Page 6