Kenwood DNX7100 - Manual (Page 8)

8 | DNX7100
Installing the Escutcheon
For General Motors
1. Refer to the section
Frame> and then remove the hard rubber frame.
2. Cut out accessory 7 to meet the shape of the
opening of the center console.
3. Attach accessory 7 to the unit.
For Toyota/Scion
1. Refer to the section
Hard Rubber Frame> and then remove
the hard rubber frame.
2. Cut out accessory 7 as illustrated.
3. Fold double-sided adhesive (accessory
8) along the slit and attach it to
accessory
7 cut-out against the
center rib as illustrated. Use 2 pieces
of accessory
8 for 1 accessory 7 cut-
out.
4. Attach accessory 7 cut-out to the unit.
Accessory 7
Cut out to meet the shape of
the opening in the vehicle.
Cutting line
Accessory 7
Accessory 8