Keys Fitness Triumph 8.3e - Manual (Page 9)

FIGURE 7
Step 1:
Remove Screw (F3) from Handlebars
(F1). Next, connect one Pulse Wire
(B6) to each Handlebar Pulse Wire (F5).
Slide both Handlebars (F) into Console
Tube (B) and twist the bars to bring
them back together. Use Screw (F3) to
secure them together. Last, use two
Bolts (B7) to secure Handlebars (F) to
Console Tube (B).
FIGURE 8
Step 1:
Attach Right Pedal (H6) to
Right Pedal Tube (A37) by
using two Bolts (J4), two Flat
Washers (J5), two Spring
Washers (J6), and two Knobs
(J7).
Step 2:
Attach Pedal Joint Covers
(H3 & H4) to Right Pedal
Tube (A37) using two Screw
(J2).
Repeat steps for left side.
Assembly
9
Figure 7
Figure 8