Karcher K 1800 IB - Manual (Page 5)

4
Step 6
Model K 2200 IB: Slide the throttle con-
trol to the fast position. Thenmove the choke lever
to the “CHOKE” position (only if engine is
cool).After starting, move the choke to “RUN”.
Step 7
Pull the starter handle. If
the engine fails to start after 3 pulls
squeeze the trigger gun to release pres-
sure, and repeat step 7.
OPERATING INSTRUCTIONS
Step 1
Connect the high pressure hose to the
unit’s high pressure outlet.
Step 2
Insert the Vario spray wand
into the gun. Push in and turn clock-
wise to lock spray wand in place.
Step 3
Connect
garden hose to unit’s
water inlet.
Step 4
Connect garden
hose to the cold water
source and turn water on
completely.
Step 5
Trigger the gun to
eliminate trapped air, wait for a steady
flow of water to emerge
from the spray nozzle.
Step 6
Model K 1800 IB:
Slide the throttle control to the fast
position. Then push primer ball three
times. Wait 3 seconds between each
push.
Note: in cold weather push 5 times
NOTE: Engines controls shown may appear different.