Kustom KXB100 - Manual (Page 8)

Kustom ® KXB100 Specifications
Output Power 100 Watts 4 Ohms at 10% THD+N
Speaker 1 X 15”
Custom Designed 4 Ohms
Input Impedance Dual Input 0 dB: 500K ohm, -6dB: 95K Ohm
Gain 72 dB Gain and Master at Max, All EQ at 12 o’clock
S/N Ratio -80 dB typical Below rated power
DIrect Output Electronically Balanced
XLR Ground Lift Switch and Level control
Aux Input 1.2 V Sensitivity Stereo 3.5mm High Impedance
Headphone Output 15 mW @ 30 ohms
per channel Stereo 3.5mm, 8 ohm minimum
Effects Loop 900 mV/1K Ohm output
Impedance Effects Send, Gain @ 12 o’clock,
Master fully CW
900mV/22K Ohm input
Impedance Effects Return, Gain @ 12 o’clock,
Master fully CW
Amplifier Tone Controls 60 Hz +/- 15 dB
500 Hz +/- 10 dB
2 KHz +/- 10 dB
10 KHz +/- 15 dB
Power Requirements USA/Canada 120VAC/60Hz, 180W
Europe 230VAC/50Hz, 180W
UK 240VAC/50Hz, 180W
Australia 240VAC/50Hz, 180W
Japan 100VAC/50-60Hz, 180W
Dimensions/Weight cm 3 /Kilogram 59.7 (Height) X 47.6 (Width) X 38.1 (Depth),
24 Kilogram
Inches/Pounds 23.5 (Height) X 18.75 (Width) X 15.0 (Depth),
53 Lbs
kustom.com