Settings – Kathrein UFS 740sw User Manual

Page 68

Here you can use the

buttons to select the type of video signal at the VCR Scart socket. Select the

signal that your external recorder can process. When doing this, refer to the operating instructions
for your recorder!

•

Composite baseband signal

(colour/picture/blanking/synchronous

signal)

•

Y/C – S-Video signal (luminance/chrominance)

VCR SCART SIGNAL OUTPUT

Here, you can use the

buttons to specify whether your TV set is a

• PAL

• NTSC

set.

Here you can use the

buttons to select whether the receiver should automatically output the

Dolby Digital signal (if this is transmitted).

AUTOM. DOLBY DIGITAL OUTPUT

TV STANDARD

Here you can use the

buttons to set a delay in milliseconds, if the sound output from your receiver

is out of synch with the TV picture (lip synchronicity). The delay can be set in 10 millisecond steps from
10 ms up to 200 ms.

AUDIO DELAY

SETTINGS

CONFIGURING THE ON-SCREEN MENU