Kenwood TK-863G - Manual (Page 2)

ADS#08008 Printed in USA
JQA-QMA1205
■ KMC-9C
Control Station
Desktop Microphone
■ KMC-27A
Microphone
(MIL-SPEC Noise-Canceling)
■ KMC-27B
Microphone
■ KMC-28A
Keypad Microphone
(MIL-SPEC Noise-Canceling)
■ KCT-18
Ignition Sense Cable
■ KCT-19
Accessories Connector
Cable
■ KCT-35
Extension Cable
for KGP-2A/2B
& KDS-100
■ KCT-36
Extension Cable
■ KES-3
External Speaker
■ KES-5
External Speaker
■ KMB-10
Key Lock Adapter
■ KMB-20
Mounting Case
■ KPS-15
DC Power Supply
■ KLF-2
Line Noise Filter
■ KAP-1
PA/HA Unit
■ KDS-100
Mobile Data Terminal
■ KGP-2A/2B
GPS Receiver /
Modem Unit
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Options
Specifications
footnotes from Front:
1 Ignition sense requires KCT-18, 19.
2 Public Address / Horn Alert Option requires KAP-1 PA/HA Unit and
KCT-19 ACC Cable Options.
Model TK-863G
GENERAL
Frequency Range
450~490 MHz
Number of Systems Max. 32
Number of Groups Max. 250
Number of Channels (Conventional) Max. 600
Channel Spacing
Wide 25 kHz
Narrow 12.5 kHz
Channel Step 5 kHz, 6.25kHz
Channel Spread 40 MHz
Current Drain
Standby Less than 0.4 A
Receive Less than 1.0 A
Transmit Less than 8.0 A
Antenna Impedance 50 Ω
Operating Voltage 13.6 V DC ± 20 %
Operating Temperature Range -22° F ~ +140° F
(-30° C ~ +60° C)
Frequency Stability ±0.00025%
(-22° F ~ +140° F)
Dimensions (W x H x D) 5-1/2 x 1-1/2 x 5-3/4 in. (140 x 40 x 145 mm)
Weight (net) 2.07 lbs. (940 g)
FCC ID ALH29383110
Model TK-863G
RECEIVER (Measurements made per EIA/TIA-603)
Sensitivity (12dB SINAD)
Wide 0.28 µV
Narrow 0.35 µV
Selectivity
Wide 80 dB
Narrow 65 dB
Intermodulation Distortion
Wide 75 dB
Narrow 63 dB
Spurious Response 85 dB
Audio Output 4 W with less than 5% distortion
TRANSMITTER (Measurements made per EIA/TIA-603)
RF Power Output 25 W
Spurious 65 dB
FM Noise
Wide 50 dB
Narrow 45 dB
Modulation
Wide 16KØF3E
Narrow 11KØF3E
Audio Distortion Less than 3%
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
LTR ® is a registered trademark of Transcrypt International.
GPS-2A
GPS-2B
Applicable MIL-STD
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Sand & Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I Cat.8 514.4/Procedure I Cat.8 514.5/Procedure I Cat.20
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V