Link, Link on, Link off – Kicker 08WXRC User Manual
Page 15: Remote vol, Remote on, Remote off, Wxrc name, Wxrc, A b c, Mem name
Once you select the
LINK
menu, a list of all 10 groups controlled by the
WXRC will be displayed in a scrolling list. The list will either display the names
you have created or the default names if you have not re-named them.
Use the
or
keys to scroll through the list of groups and press
the
key to select.
Use the
or
keys to select
LINK ON
or
LINK OFF
for the group.
When done selecting the current group’s Link property, press the
key to
save the
setting and return to the list of groups.
You can now select another group to view or adjust by using the
or
keys and select it by pushing the
key.
OR
Press the
key to return to the GROUP AMPS menu and select another
function.
REMOTE VOL
M
ME
EN
NU
U - Here you can choose to have the selected group’s output level controlled by
the Digital Remote Volume Control (DRVC).
If you wish to use the DRVC as a master volume control, raising and lowering the output level of all
the amplifiers, select all the groups and set to them
REMOTE ON
. By default, all groups are set to
REMOTE OFF
.
Use the
or
keys to scroll through the list of groups and press the
key to select.
Use the
or
keys to scroll through
REMOTE ON
and
REMOTE
OFF
When done selecting the current group’s Remote Vol setting, press the
key
to save the setting and return to the list of groups.
WXRC NAME
M
ME
EN
NU
U - Here you can change the default name of the WXRC controller (
-WXRC-
) to
any 10 character name you want. This is the name that scrolls in the DEFAULT menu.
Use the
and
keys to move the blinking cursor left or right to select
which character you want to change.
Use the
and
keys to change the selected character. (
A B C
...
1
2 3
...etc.)
When you are finished press and hold the
key for 1.5 seconds to save
your new WXRC name. You are now back in the WXRC SETUP menu.
MEM NAME
M
ME
EN
NU
U - Here you can change the default name of each of the four global memories
(
memory-1
to
memory-4
) to any 10 character name you want. Very useful for identifying a preset by
its purpose (
SPL
,
SOUND Q
,
ROCK
,
RAP
, etc).
Use the
or
keys to scroll through the
available memories (
memory-1
through
memory-4
)
When you have the memory selected that you want to name simply press the
key to select it.
You can now use the
and
keys to move the blinking cursor left or
right to select which character you want to change.
Use the
and
keys to change the selected character.
(
A B C
...
1 2 3
...etc.)
When you are finished press and hold the
key for 1.5 seconds to save
your new group name.
You can now select another Memory Name to re-name or press the
key to
return to the WXRC SETUP menu.
AMP NAME
M
ME
EN
NU
U - Here you can change the default name of each WX Series amplifier to any 10
character name you want.
Use the
or
keys to scroll through the amplifiers connected to the
WXRC.
When you have the amplifier selected that you want to re-name simply press the
key to select it.
You can now use the
and
keys to move the blinking cursor left or
right to select which character you want to change.
Use the
and
keys to change the selected character.
(
A B C
...
1 2 3
...etc.)
When you are finished press and hold the
key for 1.5 seconds to save
your new amplifier name.
You can now select another amplifier to re-name or press the
key to return
to the WXRC SETUP menu.
P
PR
RE
ES
SS
S
&
&
H
HO
OL
LD
D
P
PR
RE
ES
SS
S
&
&
H
HO
OL
LD
D
P
PR
RE
ES
SS
S
&
&
H
HO
OL
LD
D
WXRCREMOTECONTROL
WXRC
SETUP
WXRC
SETUP
29
28