Adjusting the aux input level, Select aux (external input), Select “aux level – Kenwood HM-331 User Manual
Page 37: Adjust
HM-331 (En/T)
37
Application section
2
3
1
do
wn
up
VOLUME / multi control
Adjusting the AUX Input Level
This adjusts the input level for the external equipment (video deck etc.) connected to the AUX input
terminal. Adjust so that the volume of the AUX input source sounds at an equivalent level to the CD .
(Main unit operation only)
÷ Adjust the input level while “INPUT” is displayed.
÷ Adjustment is possible over the range from -6 to +3.
Select AUX (external input).
1 Select AUX (external input).
2 Play the connected equipment.
1 Adjust the input level.
2 Set it
The level
decreases.
The level
increases.
Select “AUX LEVEL ?”.
( Press the “set/demo” key while
the “?” mark is blinking.)
Turning the knob switches the function as shown
in the character information display.
TAPE RVS.
?
O.T.E.
?
A. MEMORY (or A. PRESET) ?
(Only when the TUNER input is selected)
AUX LEVEL
?
(Only when the AUX input is selected)
BALANCE
?
TIMER SET
?
A.P.S. SET
?
Adjust.
Tone adjustment
I N P U T
C
+ 2
• • •
MD ED
TITLE
PM
MHz
BEST HITS O.T.E.
N
8 0 1 8 0 0 1 2
Set level (display for about 5 sec)
AUX
2
2
menu
set/demo
VOLUME / multi control
2
2
2
2
set/demo
2
2
2
2