Karcher K 3.96 M User Manual

Page 7

Text mode
Original mode

English

STEP 1:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.

STEP 2:
Connect garden hose to unit’s water
inlet.

STEP 3:
Connect garden hose to the cold wa-
ter source and turn water on com-
pletely.

STEP 4:
Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a receptacle.

Press RESET button, indicator
should be “ON”.
Press TEST button, indicator should
be “OFF”.
Press RESET button for use.

WARNING

Do not use if above test fails.

STEP 5:
Unlock the Safety lock. Trigger the
gun to eliminate trapped air, wait for
a steady flow of water to emerge
from the spray nozzle.

STEP 6:
Turn on the high pressure washer
(I).
The motor starts only if the trigger
of the gun is pulled and shuts off
when the trigger is released.

OPERATING INSTRUCTIONS