Assembly instructions, Step 1, Step 2 – Karcher K 2300 G User Manual

Page 4: Step 6, Step 7, Step 4, Step 5, Step 3, Step 8

1 800-537-4129 page 3

Required tools: adjustable pliers.

ASSEMBLY INSTRUCTIONS

Step 1

Attach the front

guard to the frame. Align
holes, insert bolt and tighten
with lock nut.

Step 2

Attach the handle

to the frame of the pressure
washer.

Step 6

Check oil level. Oil

level should be to the oil filler
neck. Be sure the machine is
level when checking the oil
level. (Refer to the engine’s
operating manual for seasonal
grades.)

Step 7

Fill gas tank with

unleaded gasoline.
Do not use leaded gasoline.

Important! Do not run the engine with a high or low oil level as this can cause engine dam-
age. If you have further questions regarding the engine, please refer to the engine’s oper-
ating manual included with the unit.

Step 4

Attach the triple jet nozzle to the

spray wand.

Step 5

Attach the spray wand to the trig-

ger gun.

Step 3

Align holes, insert

bolt, and tighten with knob.

Step 8

Attach high pres-

sure hose to trigger gun.