Kodak EasyShare C663 - Manual (Page 35)

Doing more with your camera
www.kodak.com/go/support 29
White Balance
Choose your lighting condition.
This setting remains until you turn
the Mode dial. Auto (default)—automatically corrects white balance.
Ideal for general picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light
bulbs. Ideal for indoor pictures under tungsten or halogen
lighting without flash.
Fluorescent—corrects the green cast of fluorescent
lighting. Ideal for indoor pictures under fluorescent lighting
without flash.
Open Shade—for pictures in shade in natural lighting.
Available only in P/M mode.
Exposure Metering
Evaluate light levels at specific
areas of a scene.
This setting remains until you turn
the Mode dial. Multi-pattern (default)—evaluates lighting conditions
throughout the image to give an optimum picture exposure.
Ideal for general picture taking.
Center-weight—evaluates the lighting conditions of the
subject centered in the viewfinder. Ideal for backlit subjects.
Center-spot—similar to Center-weight, except the
metering is concentrated on a smaller area of the subject
centered in the viewfinder. Ideal when you need an exact
exposure of a specific area in the picture.
Available only in P/M mode.
Focus Zone
Select a large or concentrated
area of focus.
This setting remains until you turn
the Mode dial. Multi-zone (default)—evaluates 3 zones to give an even
picture focus. Ideal for general picture taking.
Center-zone—evaluates the small area centered in the
viewfinder. Ideal when precise focus of a specific area in the
picture is needed.
Available only in P/M mode.
NOTE: For the best pictures, the camera is set to Multi-zone when
in Landscape mode.
Setting Options