Kodak MP6000 - Manual (Page 18)

Brightness 0
Dolby
Video Setup Page
Component
TV Mode
Sharpness
Brightness
Contrast CVBS
Low
00
00
Brightness
Dolby
SYSTEM SETUP
16
CONTRAST: Sets the contrast level of Video output.
Press right button the TV will display below.
Press LEFT/RIGHT button to adjust, then press
ENTER/PLAY button to confirm and return to
menu.
4.5 CONTRAST
The preference setup is active only when no disc is
loaded. The settings remain set until changed at a
later time.
5. PREFERENCE SETUP PAGE
5.1 TV TYPE
TV TYPE: This player supports different TV outputs,
including MULTI(Auto), NTSC, and PAL systems.
lf your TV support only NTSC or PAL and you
inadvertently select the wrong TV type, the TV
screen will flicker and be black-and-white.
In this case, you should press the SETUP button
to set as following Note.
Preference Page
Preference Page
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
PAL
EN
EN
EN
PAL
EN
EN
EN
PAL
Multi
NTSC
Set TV Standard
Dolby
Dolby
Note: How to Set the TV Type?
You may switch the NTSC/PAL setting of the DVD
player to match the video signal of your TV.
The table below shows what kinds of disc are com-
patible with each setting (MULTI, PAL and NTSC)
Video Setup Page
Component
TV Mode
Sharpness
Brightness
Contrast CVBS
Low
00
00
Contrast
Dolby
Contrast 0
Dolby
5.2 AUDIO
AUDIO: Sets the preferred audio language as the
default when playing DVD. (If DVD supports that
language)
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
Preferred Audio Language
4.4 BRlGHTNESS
BRIGHTNESS: Sets the brightness level of video
output.
Press right button the TV will display below.
Press LEFT/RIGHT button to adjust, then press
ENTER/PLAY button to confirm and return to
menu.