Kenwood KRC-859C - Manual (Page 37)

— 37 —
Disc Control Mode
• Number/ letter entry buttons
Used to specify the track (disc) number used in direct track
(disc) searches.
Used to enter letters during disc name preset.
• TRACK buttons
Press the TRACK
–
button to search through the tracks
backwards.
Press the TRACK
+
button to search through the tracks
forwards.
Used to move the cursor whilst entering disc name.
• DISC buttons
Press the DISC
–
button to search through the discs backwards.
Press the DISC
+
button to search through the discs forwards.
Selects numbers and symbols whilst entering disc name.
• 38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
Selects the type of characters at the time of entering the disc
name.
• OK button
During disc name input, stores the already input data in memory
and ends the input mode.
Selects disc during the disc name preset play mode.
• DNPP button
Enters and cancels the Disc Name Preset Play mode.
• PROG button
Plays the reverse side of the tape. When pressed during fast
forwards and rewinds, this button stops the tape and starts
playing it.
The use of any accessories except for those provided might result
in damage to the unit. Make sure only to use the accessories
shipped with the unit, as shown above.
2CAUTION
Accessories
.........1
1
.........2
2
.........1
3
.........1
4
.........1
5
External view
......... Number of items
.........1
6
.........1
7
.........1
8
.........1
9
External view
......... Number of items
6 ~9...KRC-PS959R,859R/C/W
only