Kompernass D-44867 - Manual (Page 8)

- 6 -
Juice extraction
1. Adjust the fruit pulp regulator t , by
sliding it, so that the slits in the fruit
pulp sieve
r / y lie exactly above each
other if you wish to have fruit juice
with fruit pulp. Adjust the fruit pulp
regulator
t , by sliding it, so that the
slits in the fruit pulp sieve r / y are not
lying above each other if you do not
wish to have fruit juice with fruit pulp.
2. Cut the fruits in half
(orange, lemon etc.)
3. Press the halved fruit lightly onto the
squeezing cone w / e . The appliance
switches itself on automatically as
soon as the squeezing cone
w / e is
pressed down.
4. Apply pressure at various parts of the
fruit rind with your fingers. Thereby
the juice will be evenly squeezed out
of the fruit.
5. When no more juice flows from the fru-
it, stop applying pressure to the squee-
zing cone
w / e . The appliance stops.
6. Press the squeezing cone w / e down
repeatedly to loosen it, until it turns
in the opposite direction.
7. When no more juice flows from the
fruit, stop applying pressure to the
squeezing cone
w / e . The appliance
stops. Remove the fruit skin from the
squeezing cone
w / e .
8. Continue similarly with further fruit-
halves until you have squeezed out
the desired volume of fruit juice. The
current volume squeezed can be read
off from the scale on the side of the
juice collector
u .
Note: When pressing out juice, do not
exceed the 600 ml volume marking
on the scale of the juice collector
u .
Emptying
ƽ
Important: Remove the power plug
from the wall socket when you empty
the fruit pulp sieve or the juice collec-
tor
u .
• Turn the juice collector u anti-clock-
wise until the perceptible resistance
desists. You can now lift it from the
drive axle
i and pour the juice out.
Disassembly
If you wish to disassemble the Citrus Press,
e.g. for the cleaning of it, proceed as
follows:
1. Remove the power plug from the wall
socket o .
2. Remove the squeezing cone w / e .
3. Remove the fruit pulp sieve r / y .
Press the hook on the underside of the
upper fruit pulp sieve
r inwards. At the
same time exert light pressure on the
fruit pulp sieve
t . The components
allow themselves to be pressed apart.
4. Turn the juice collector
u anti-clock-
wise until the perceptible resistance
desists. You can now lift it from the
drive axle
a .
IB_KH25_E6575_EN.qxd 02.08.2007 9:38 Uhr Seite 6