Kompernass KH 107 - Manual (Page 30)

- 30 -
Placement
The charging station
ብ may only be operated free-standing in dry rooms.
In moist rooms, especially in the vicinity of water (bath), the charging station
ብ must be firmly fixed to the wall, to protect it from falling into water:
• Pull the wall fixture
ቦ downwards from underneath the charging station
ብ.
• Provide for the correct assembly of the wall fixture
ቦ close to a power
socket. For this, use the plugs and screws supplied for this purpose.
• Subsequently, place the wall fixture
ቦ, charging station ብ and brush
holder
ቤ back together. Ensure that the power cable runs laterally
through the recesses of the wall fixture
ቦ and the charging station ብ. It
may not become jammed!
Installing / removing brush heads
Turn the brush head
ቢ clockwise and remove it upwards.
To install the brush head
ቢ, apply the opposite procedure.
The brush head
ቢ must click in on installation. Only use original brush he-
ads, to avoid damage to the appliance.
(For replacement brush heads, see the order form)
IB_KH107_E269_UK_5 29.08.2007 17:42 Uhr Seite 30