Kompernass KH 4169 - Manual (Page 5)

- 3 -
Technical data
Mains voltage: 220-240 V ~ 50Hz
Power cable length: ca. 2 m with switch
Power consumption : 40 W
Protection class: II /
Bulb type: max. 40 W / E 14
(Not supplied):
Lamp base: 14.5 cm in diameter
Items supplied
1 Desk Lamp
1 Operating manual
• Check to ensure that the appliance is undamaged,
all component parts are present and that packag-
ing remnants are removed from it.
Description of the appliance
q Bulb socket
w Lamp shade
e Swan neck
r Switch
Taking into use
To be able to take the desk lamp into use it must first
of all be fitted with a bulb (40W / E14).
•
Insert the bulb into the bulb holder and secure
it by turning it in a clockwise direction.
Utilisation
• Place the lamp at a suitable location, as detailed
in the Safety Instructions.
• Insert the power cable into the wall socket.
You can now switch the lamp on and off at the
switch
r .
• Alter the direction of illumination by means of
the flexible swan neck only
e , not with the
lamp shade w . The lamp shade can get very
hot when the lamp is in use.
Changing the bulb
CAUTION!
Check to ensure that the power plug is removed
from the wall socket. This avoids the potential
risk of electric shock! If the lamp has been in
use, first allow it to cool down completely. This
avoids the potential risk of being burnt.
• Turn the bulb anti-clockwise until it can be
removed from the bulb holder.
• Insert the new bulb into the bulb holder and
secure it by turning it in a clockwise direction.
Cleaning
CAUTION!
Check to ensure that the power plug is removed
from the wall socket. This avoids the potential
risk of electric shock! If the lamp has been in
use, first allow it to cool down completely. This
avoids the potential risk of being burnt.
• Clean the appliance only with a dry or lightly
moistened cloth. Do not use abrasive or aggres-
sive cleaning agents, these could damage the
upper surfaces.
IB_KH4169_BK2256_LB4 09.01.2008 11:38 Uhr Seite 3