Karcher G 2650 OH User Manual

Page 11

English

1: Disconnect all water connections.

2: Turn on the machine for a few
seconds, until the water which had
remained in the pump exits, turn off
immediately.

3: Do not allow high pressure hose
to become kinked.

4: Store the machine and accesso-
ries in a room which does not reach
freezing temperatures. DO NOT
store near furnace or other sources
of heat as it may dry out the pump
seals.

CAUTION

Failure to follow the above directions
will result in damage to the pump as-
sembly and accessories.

Kärcher also recommends the regular
practice of using a pump protector like
“Kärcher Pump Guard” to help during
storage in the winter months.

All Kärcher pumps ship with oil already
inside direct from the factory. There is
no need to add oil.

You should routinely make a visual in-
spection of the pressure washer’s
pump. If you notice oil leaking around
the pump seals, you should take the
pressure washer to a Kärcher-Autho-
rized Service Center for repair. (You
can locate a service center in your area
online at www.karcher-usa.com/ser-
vice.)

The pump on your Kärcher pressure
washer does not require maintenance.
Any attempts to service or alter the
pump may damage your pressure
washer and void your product warranty.

Carry out maintenance tasks for the en-
gine according to the specifications pro-
vided in the operating instructions
provided by engine manufacturer.

WINTERIZING AND LONG-TERM STORAGE

MAINTENANCE INSTRUCTIONS

Kärcher pump

Initial Use

Pump Inspection

Pump Maintenance

Engine