Kingston Technology KNS500/WG User Manual

Page 19

Appendix C Specifications

KNS800/WG User’s Guide - Rev. B01 Kingston Technology Company

Fast EtheRx Model KNS800/WG

Compliance:

IEEE 802.3u 100BASE-TX Standard

IEEE802.3i 10BASE-T Standard

IEEE802.3 CSMA/CD Ethernet Standard

Media Interface:

Eight (8) auto-negotiating 10/100 Mbps UTP ports

Uplink Port:

UTP port 8

10BASE-T /100BASE-TX:

Auto-Negotiation

Half / Full-duplex mode:

Auto-Negotiation

Diagnostic LEDs:

1 LED for Power Indicator (steady green)

8 100BASE-TX speed detection LEDs(steady green)

8 Link LEDs (steady green) /Activity (flashing green)

8 LEDs for Full-Duplex (steady green) /Collision
(flashing amber)

Switching Approach:

Store-and-Forward

Flow Control:

Half Duplex:

Full Duplex:

Collision-based Backpressure

IEEE 802.3x

MAC Address Support:

Up to 1K MAC addresses

Filtering/Forwarding

Rate (min. packet size 64 byte):

148,800 packets/second @ 100Mbps

14,880 packets/second @ 10Mbps

Latency (min. packet size 64

byte)

100Mbps to 100Mbps

≤

8.8

10Mbps to 10Mbps

≤

64.4

Max Segment Length:

100 meters (328 feet)

Connector Type:

RJ-45, Female

Cable Type:

UTP 26 to 22 AWG

Cable Grade:

100BASE-TX:

10BASE-T:

Category 5 or better

Category 3, 4, 5 or better

Environmental:

Operating Temp.

0°C to 45°C (32°F to 113°F)

Storage Temp.

-20°C to 60°C (-4°F to 140°F)

Relative Humidity

10% to 90% non-condensing

Electrical:

Input Voltage:

100VAC – 240VAC, 50/60Hz, external auto-sensing
power supply

Output Voltage:

5VDC/3A

Power Consumption:

9.8 Watts maximum

Physical:

Dimension (HxWxD):

1.1” x 6.5” x 6.1” (28mm x 165mm x 155mm)

Weight:

2 lbs. (0.9 kg)

Certification

EMI Standards:

FCC Class A, CE CISPR A, C-Tick

EMC Standards:

EN55022, IEC801-2, IEC801-3, IEC801-4

Low Voltage Directive:

EN60950

This manual is related to the following products:

KNS800/WG