Kenwood FP520 series - Manual (Page 5)

safety
● Never remove the lid until the cutting disc has completely
stopped.
● Handle the cutting discs with care - they are extremely sharp
to use the cutting discs
1 Fit the drive shaft and bowl onto the power unit.
2 Holding by the centre grip , place the disc onto the
drive shaft with the appropriate side uppermost .
3 Fit the lid.
4 Choose which size feed tube you want to use. The
pusher contains a smaller feed tube for processing
individual items or thin ingredients.
To use the small feed tube - first put the large pusher
inside the feed tube.
To use the large feed tube - use both pushers
together.
5 Put the food in the feed tube.
6 Switch on and push down evenly with the pusher -
never put your fingers in the feed tube.
hints
● Use fresh ingredients
● Don’t cut food too small. Fill the width of the large feed tube fairly full. This
prevents the food from slipping sideways during processing. Alternatively use
the small feed tube.
● When using the chipper disc, place ingredients horizontally.
● When slicing or shredding: food placed upright comes out shorter than food
placed horizontally .
● There will always be a small amount of waste on the plate or in the bowl after
processing.
k citrus press
Use the citrus press to squeeze the juice
from citrus fruits (eg oranges, lemons, limes
and grapefruits).
ቢ cone
ባ sieve
to use the citrus press
1 Fit the drive shaft and bowl onto the power
unit.
2 Add the sieve and turn clockwise until the
interlock fin on the sieve aligns with the line
on the outlet cover
.
3 Place the cone over the drive shaft turning
until it drops all the way down .
4 Cut the fruit in half. Then switch on and
press the fruit onto the cone.
● The citrus press will not operate if
the sieve is not locked correctly.
k mill
Use the mill for milling herbs, nuts and coffee beans.
ቢ blade unit
ባ sealing ring
ቤ jar
ብ sprinkler lid
safety
● Never fit the blade unit to your machine without the jar fitted.
● Never unscrew the jar while the multi-mill is fitted to your
machine.
● Don’t touch the sharp blades. Keep the blade unit away
from children.
● Never remove the multi-mill until the blades have completely
stopped.
important
● To ensure long life of your mill, never run for longer than 30
seconds. Switch off as soon as you’ve got the right consistency.
● Don’t process spices - they may damage the plastic.
● The machine won’t work if the mill is fitted incorrectly.
● Use for dry ingredients only.
to use your mill
1 Put your ingredients into the jar. Fill it no more than half full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down. Lower it into the
jar, blades down.
4 Screw the blade unit onto the jar until it is finger
tight.
5 Remove the liquidiser outlet cover by turning in an
anti clockwise direction.
6 Place the mill on the liquidiser outlet and turn to lock
in a clockwise direction k.
7 Switch on to maximum speed or use the pulse
control.
8 After milling, you can replace the blade unit with the
sprinkler lid and shake out your food.
● The sprinkler lid is not airtight.
hints
● Herbs are best milled when clean and dry.
k KENSTORE™ attachments carousel
Your food processor is supplied with an attachment storage carousel that fits
inside the bowl.
to use the storage carousel
1 Fit the knife blade to the bowl.
2 Then fit the whisk, discs and canopy into the carousel
k.
3 Fit the carousel over the knife blade and place the processor lid on top k
4
k d
k e
k d k e
k
f
k g
k
f
k g
k
h
ki
26
k h
ki
ባ
ቢ
ቢ
ባ
ቤ
ብ
25
j
27
k
l
k k
kl
k j
kl