Kd-cda3 operating instructions, Technical specifications – Key Digital KD-CDA3 User Manual
Page 15

KD-CDA3 Operating Instructions
Page 25 of 29
KD-CDA3 Operating Instructions
Page 24 of 29
■
RCA connectors for all Video and Audio inputs and outputs
■
Future-proof and expandable:
➾
Can be cascaded to KD-CDA3 or other Key Digital
®
Distribution Amplifiers
to drive as many outputs as desired from one source
■
It is possible to substitute Composite Video (CVBS) or S-Video in place of the
Component Video signals, using appropriate adapter cables
Compatible Video Signals
■
Compatible with all standard analog video signal formats that use 50Hz or 60Hz
refresh rates, including:
➾
1080p, 1080i, 720p, 576p, 576i, 540p, 480p, 480i
Video
■
Component Video (YPbPr) or RGBHV Video
➾
RGBHV installations preclude Audio distribution with your KD-CDA3 unit
■
Three RCA-type color-coded input connectors (YPbPr, RGB)
■
1V p-p @ 75 ohms, terminated
■
300 MHz video bandwidth
■
Sync:
➾
Component Video (YPbPr) sync on "Y" input
➾
The analog audio input/output connectors also serve as the Horizontal
and Vertical sync for RGBHV signals
■
It is possible to substitute Composite Video (CVBS) or S-Video in place of the
Component Video signals, using appropriate adapter cables
➾
Supports up to seven (7) CVBS Outputs or three (3) S-Video Outputs
TECHNICAL SPECIFICATIONS
Model: KD-CDA3 Operating Instructions
HDTV Distribution Amplifier
3-Channel Component Video & Audio Distribution Amplifier
Key Features
■
Enables 3-channel signal distribution from any HDTV or SDTV Component Video
(YPbPr) or RGBHV Video source including 1080p, to HDTV-ready displays
➾
Also distributes S-Video
➾
Also distributes a Composite Video (CVBS) signal to up to seven (7)
Composite Video displays
■
Distributes Video and analog stereo or digital (PCM) Audio
➾
RGBHV installations preclude Audio distribution with your KD-CDA3 unit
■
No controls
■
Crystal-clear images
Inputs and Outputs
■
One (1) Audio/Video Input
■
Three (3) Audio/Video Outputs
■
Each Input and Output array is comprised of three (3) component YPbPr analog
Video connectors, and two (2) analog stereo Left and Right Audio connectors:
➾
Instead of analog Audio Input/Output,
the two (2) connectors can be used for:
–
The Horizontal (H) and Vertical (V) sync for RGBHV signals, or
–
Two (2) PCM digital Audio signals
KDCDA3_OperInstructions.qxd 1/4/06 12:58 PM Page 24