Kodak K6200 - Manual

Model K6200/K6200E
4F8289
Thank you for purchasing the Kodak Ni-MH 1-Hour Battery Charger. Please
read these instructions for safe operation.
Features
• Charges AA and AAA Ni-MH rechargeable batteries.
• Charge up to 4 AA or up to 2 AAA batteries.
Recommended Temperature Ranges for Use
Ni-MH
To use (discharge) the batteries 32°–122°F (0°–50°C)
To charge the batteries 41°–95°F (5°–35°C)
To store the batteries -4°–95°F (-20°–35°C)
Using the batteries outside the above temperatures may shorten battery life
and decrease efficiency.
Operating Instructions
CHARGE INDICATOR LIGHT
Light is on (steady) while charging and turns off automatically when charging
is complete. A blinking light indicates a charging error—replace batteries; use
only Ni-MH type.
HOW TO CHARGE
1. Place up to 4 AA or up to 2 AAA size batteries into the charger so that the
+ (positive) and – (negative) ends (terminals) of the batteries correspond
to the same + and – marking in the charger. When charging 2 AA batteries,
insert them together into either end positions. For charging 2 AAA batteries,
use inside positions.
Note: For best performance, use only Kodak Ni-MH batteries.
2.Plug the charger into an electrical outlet of 100-240V AC. The charge
indicator light is illuminated and battery charging begins. (NOTE: Do not
insert or remove batteries during this charging process). The charging cycle
time depends on battery type.
3.Be careful when removing the batteries right after charging.The temperature
of batteries can be high.
IMPORTANT SAFETY INSTRUCTIONS—
Save These Instructions
• DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
• For connection to a supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet. This battery charger is
intended to be correctly oriented in a vertical or floor mount position.
CAUTION:
• Charge only Ni-MH AA/AAA rechargeable batteries. Other types of batteries
may burst causing personal injury and damage.
• Risk of electric shock. Dry location use only.
• Do not operate charger if it has been damaged.
• To reduce the risk of electric shock, unplug charger from outlet before
attempting any maintenance or cleaning.
• Insert batteries correctly by matching + (positive) and - (negative) ends
(terminals) of the battery to the same + and - position in the charger.
• Be sure to use charger with correct voltage: AC 100~240V.
• Do not insert any objects (such as a screwdriver or metal wires) into the
charger.
• Do not modify or disassemble.
• If something appears wrong with the charger and/or batteries, disconnect
from the electric outlet immediately.
• Keep out of reach of infants. Children may use only under strict parental
supervision.
• Store in a dry cool place.
Ni-MH AA/AAA Batteries—
CAUTION:
• Do not use batteries with their + (positive) and - (negative) ends (terminals)
reversed.
• Do not modify or disassemble.
• Never expose to heat or fire.
• If any liquid from the battery comes in contact with clothes or skin, wash
with clean water immediately and consult a doctor at once.
• Stop using batteries immediately if you notice anything wrong with them
(such as leakage, color change or deformity).
• Do not use charged and discharged batteries together.
• When charging do not mix Ni-MH type batteries. Use same brand batteries
when charging.
• When using 2 or more batteries in a device, make sure they were charged
simultaneously.
• Charge the batteries before using.
• Do not allow batteries to touch metal objects such as keys or coins.
DANGER!
Failure to comply with all of the above warnings may cause electric shock, battery
damage/leakage, overheating, explosion, or fire and can result in severe personal
injury and/or damage to property.
Specifications
Please dispose of this product in accordance with all applicable regulations.
Disposal may be regulated. For disposal or recycling information, please
contact your local authorities or, in the U.S.A., contact the Electronics Industry
Alliance website at www.eiae.org.
Guarantee: This battery charger and batteries are guaranteed against defects
in material and workmanship for one year after date of purchase. Any device
damaged by these batteries due to such defect will be repaired or replaced
(at our option) if sent with batteries to Kodak. To Claim: In the U.S. and
Canada call toll free, 1-888-375-6325 or 1-800-242-2424, between the hours
of 9:00a.m. and 8:00p.m. (EST) Monday through Friday for authorization and
mailing address. Send charger or batteries prepaid with your address and
phone number, copy of proof of purchase and description of usage.
Replacement charger or batteries will be mailed prepaid. No cash refunds will
be given. Outside the U.S. and Canada, check with your local Kodak house
or go to the following URL for a support number in your area:
http://www.kodak.com/include/international.shtml.
FCC compliance and advisory:
This equipment has been tested and found to
comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC
Rules. These limits are designed to providereasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
notinstalled or used in accordance with the instructions, may cause harmful
interference toradio communications. However, there is no guarantee that interference
will not occur ina particular installation.
If this equipment does cause harmful interference to radio or television reception,
whichcan be determined by turning the equipment off and on, the user is encouraged
to try tocorrect the interference by one or more of the following measures: 1) reorient
or relocatethe receiving antenna; 2) increase the separation between the equipment
and the receiver;3) connect the equipment to an outlet on a circuit different from
that to which the receiveris connected; 4) consult the dealer or an experienced
radio/TV technician for additionalsuggestions.
Any changes or modifications not expressly approved by the party responsible
forcompliance could void the user’s authority to operate the equipment. Where
shieldedinterface cables have been provided with the product or specified additional
componentsor accessories elsewhere defined to be used with the installation of the
product, they mustbe used in order to ensure compliance with FCC regulation.
Kodak Model No. K6200/K6200E
Voltage
100 - 240V AC
Input 50-60Hz, 18W (max.)
Output 1.4V DC 1.15A x 4 or 1.4V DC 2.3 A x 2
LED Indication ON steady — charging
OFF — stand-by or charging complete
Battery/ Ni-MH AA 1-2 batteries 77 min.
Charge time (2500mAh) 3-4 batteries 154 min.
(minutes) Ni-MH AA 1-2 batteries 64 min.
(2100mAh) 3-4 batteries 128 min.
Ni-MH AA 1-2 batteries 55 min.
(1800mAh) 3-4 batteries 110 min.
Ni-MH AAA 1-2 batteries 63 min.
(900mAh)
Dimensions 12.0 x 7.0 x 3.3 cm
(L x W x H) (4.72 x 2.75 x 1.29 in.)
Weight 130 g (4.60 oz.)
AA/AAA Charger:
Kodak Ni-MH 1-Hour
Battery Charger
Operating Instructions
2 AA
battery charge
4 AA
battery charge
2 AAA
battery charge
Waste Electrical and Electronic Equipment Labeling
In the European Union, do not discard the product as
unsorted municipal waste. Contact your local authorities
or go to www.kodak.com/go/recycle for recycling program
information.