Karcher HD 425 User Manual
Page 4
4
IMPORTANT PRECAUTIONS – continued
ASSEMBLY INSTRUCTIONS
• Never use the pressure washer to draw in
water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
NOTE: Dirt in the feed water will
damage the unit. To avoid this risk,
we recommend fitting a water filter.
• Always prevent debris from being drawn into
the unit by using a clean water source and an
accessory water filter if required.
Water Supply
(Cold Water Only)
• Water hose must be at least a 1/2 inch or
5/8 inch in diameter.
• Flow rate of water supply must not fall
below 2 GPM (gallons per minute).
• Flow rate can be determined by running the
water for one minute into an empty 5-gallon
container.
• The water supply temperature must not
exceed 104°F/40°C.
Step 1
Attach the high pressure hose
to the spray gun.
Step 2
Attach the wand to the
spray gun.
Step 3
Attach the triple jet nozzle to
the wand.
- HD 4000 C (33 pages)
- T350 T-Racer (8 pages)
- G2600XH (40 pages)
- K 5.690 (17 pages)
- HD 3000 DH (12 pages)
- T-RACER T 200 (12 pages)
- K 2.55 (44 pages)
- K9000G (12 pages)
- 460 (12 pages)
- K 520 (12 pages)
- 1750 (12 pages)
- K7000G (7 pages)
- K 2.29 M (12 pages)
- K 3.99M (48 pages)
- K 5.93 (16 pages)
- K 3.79 M (12 pages)
- K 2.080 (12 pages)
- KM 85/50 W B (17 pages)
- K 2.7 (16 pages)
- K 5.68 M (52 pages)
- G 2300 LT (7 pages)
- K 5000 G (12 pages)
- G 2401 OH (40 pages)
- K 4.93 M (12 pages)
- HDS 2000 (16 pages)
- PUZZI 300 (15 pages)
- T-Racer (8 pages)
- K 6.450 (16 pages)
- K 2.54 M (12 pages)
- K 2.27 (48 pages)
- K 2.16 (48 pages)
- K 6.85 M (16 pages)
- K 2500 HK (12 pages)
- K 2.300 (16 pages)
- K 2.21 (48 pages)
- G 2800 OH (40 pages)
- G 2600 VC (46 pages)
- K 5.540 (64 pages)
- K 3.91 M (52 pages)
- G2800XC (40 pages)
- K 3.92 M (48 pages)
- K 360 M (12 pages)
- K 370 M (12 pages)
- K 2.360 (52 pages)
- KB 3.99 M (12 pages)