Advanced > filters > mac filters – Kyocera KR1 User Manual

Page 23

Text mode
Original mode

Using the Configuration Menu

Advanced > Filters > MAC Filters

Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.

Filters-

Select the filter you wish to use; in this case, MAC filters was chosen.

MAC Filters-

Choose Disable MAC filters; allow MAC addresses listed below; or deny MAC addresses listed below. By
default the MAC Filters is Disabled MAC Filters.

Name-

Enter the name here.

MAC Address-

Enter the MAC Address.

DHCP Client-

Select a DHCP client from the pull-down list; click Clone to copy that MAC Address.