Konica Minolta Oxygen Saturation Monitor PULSOX-300i - Manual (Page 24)

22
Ext.Connect
● When the PULSOX-300i is connected to a computer, the
PULSOX-300i will enter UA communication mode automatically.
In UA communication mode, the display will appear as shown
below:
● It is impossible to take measurements while the instrument is in
communication mode.
● When removing the PULSOX-300i from the UA-300, the power of
the instrument will be set to OFF automatically.
This shows the PULSOX-300i is in UA
communication mode. The instrument is
connected to the computer with the UA-300.
T h i s s h o w s m e a s u r e d d a t a i s b e i n g
downloaded to the computer. Do not remove
the UA cable and/or USB cable from the
PULSOX-300i and/or the computer.