Assembly instructions – Karcher G 2500 HT User Manual
Page 5
5
ASSEMBLY INSTRUCTIONS
Step 1
Attach the handle to the frame of the
pressure washer. Align holes, insert bolts,
and tighten with knobs.
Step 2
Attach the gun/hose storage handle.
Step 3
Fasten the rubber grommets in the nozzle
holder.
Step 4
Place the quick connect nozzles in the
nozzle holder.
Step 5
Attach the wand to the spray gun.
Step 6
Pull the spring-loaded collar of the wand
back to insert your choice of quick connect
nozzle.
Step 7
Release the collar and push the nozzle until
the collar clicks.
DANGER
High pressure in nozzle area.
Risk of injury caused by improper locked
nozzle.
Make sure you hear a click when
inserting the nozzle tip into the wand.
Pull the nozzle to make sure it is seated
properly before operating your unit.
Step 8
Attach the high pressure hose to the spray
gun.
- HD 4000 C (33 pages)
- T350 T-Racer (8 pages)
- G2600XH (40 pages)
- K 5.690 (17 pages)
- HD 3000 DH (12 pages)
- T-RACER T 200 (12 pages)
- K 2.55 (44 pages)
- K9000G (12 pages)
- 460 (12 pages)
- K 520 (12 pages)
- 1750 (12 pages)
- K7000G (7 pages)
- K 2.29 M (12 pages)
- K 3.99M (48 pages)
- K 5.93 (16 pages)
- K 3.79 M (12 pages)
- K 2.080 (12 pages)
- KM 85/50 W B (17 pages)
- K 2.7 (16 pages)
- K 5.68 M (52 pages)
- G 2300 LT (7 pages)
- K 5000 G (12 pages)
- G 2401 OH (40 pages)
- K 4.93 M (12 pages)
- HDS 2000 (16 pages)
- PUZZI 300 (15 pages)
- T-Racer (8 pages)
- K 6.450 (16 pages)
- K 2.54 M (12 pages)
- K 2.27 (48 pages)
- K 2.16 (48 pages)
- K 6.85 M (16 pages)
- K 2500 HK (12 pages)
- K 2.300 (16 pages)
- K 2.21 (48 pages)
- G 2800 OH (40 pages)
- G 2600 VC (46 pages)
- K 5.540 (64 pages)
- K 3.91 M (52 pages)
- G2800XC (40 pages)
- K 3.92 M (48 pages)
- K 360 M (12 pages)
- K 370 M (12 pages)
- K 2.360 (52 pages)
- KB 3.99 M (12 pages)