Kompernass KH 4083 - Manual (Page 8)

➩ Push the battery compartment
w back into the housing. The battery
compartment w must click in audibly.
➩ Whilst the batteries are being exchanged, „PO“ appears in the dis-
play y .
For as long as the PO display is blinking, the watering computer
will retain its programming. If the display goes blank, the program-
ming has also been deleted.
Connecting to the water mains
➩ Screw the inflow connector on to a suitable 3/4“ water tap
(1“-external thread).
➩ Screw the outflow connector
e on to a water hose.
Ensure that the outflow connector e is always pointed downwards.
Setting the Clock
➩ Open the cover
r .
➩ Press the „M“ button until a bar
y appears in the display above the
symbol and a bar blinks under „“MON“.
The watering computer is now in the clock setting mode.
➩ Press the „+“ or „–“ button to set the current day of the week.
➩ Confirm your selection with the
button.
The hour value now blinks in the display y .
- 6 -
IB_KH4083_BL1562_EN_LB3+6 02.11.2007 11:04 Uhr Seite 6
q