Kenwood KCA-R71FM - Manual (Page 23)

— 23 —
MP3 source
? Cannot play an MP3. 67
✔ The disc format is not accepted in the unit connected.
☞ Refer to the instruction manual of the disc changer (slave unit) for
creation of compatible formats.
✔ The MP3 has no or invalid track name extension. 68
☞ Add the ".MP3" extension to the MP3 track name.
✔ The media is scratched or dirty. 69
☞ Clean the media.
? Noise or no sound generated when an MP3 is played. 70
✔ The track has the MP3 track name extension while it is not an MP3.
☞ Do not use the ".MP3" extension in non-MP3.
? Takes time before the unit starts playing MP3. 71
✔ The medium contains many discs, tracks, and hierarchical levels.
☞ The unit checks all tracks on the loaded medium first. If the
medium has many tracks recorded, it may take a long time for the
unit before it starts playing MP3.
? Fails to play MP3 in the intended order. 72
✔ The MP3 tracks were not written by the CD writer in the order in
which you wanted them to be played.
☞ Depending on the CD writer, you may be able to set the order in
which MP3 tracks are to be played by writing them onto a
medium with their track names beginning with play sequence
numbers such as "01" to "99".
? The sound skips when an MP3 is being played. 73-1
✔ The media is scratched or dirty.
☞ Clean the media.
✔ The recording condition is bad. 73-2
☞ Record the media again or use another media.
? The songs in the selected folder aren’t played in Folder Search
mode.
77
✔ There are no MP3 in the selected folder.
☞ Make sure there’s recorded content in the MP3 media.
? The MP3 track search takes time. 78
✔ Many tracks are recorded on the media.
☞ When the media directory is complex, the track search can take
time.
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 23