Kenmore 125.15884801 - Manual (Page 8)

8
Step 4
Set the burner assembly onto the cabinet
as shown.
CAUTION: Make sure the valve gas
orifice slides and fits into the
burner tube.
Step 5
Secure the burner assembly with the
three M6 X 16 mm bolts with #10
washers and gaskets from the inside of
the cabinet. Securely tighten the bolts.
Step 6
Attach the loose igniter wire to the igniter
on the control panel as shown.
Note: With the help of a friend, turn the
smoker body to its upright
position.
Burner Tube
Gas Valve
Orifice
Igniter
Burner Tube
Gas Valve
Orifice
Gaskets
#10 Washers