Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER - Manual (Page 15)

11
Unpacking and Placement
This section describes the procedures for safely unpacking and placing your
Evolution Two Monaural Preamplifier. Each Evolution Two preamplifier channel is
shipped in 1 carton consisting of 2 chassis: 1 power supply chassis and 1 pream-
plifier chassis.
Opening the Evolution Two Shipping Carton
Each Evolution Two shipping carton measures 22.3 in. (56.6 cm) wide by 23.5 in.
(59.7 cm) high by 16.2 in. (41.1 cm) deep.
Preamplifier Chassis. Each preamplifier chassis measures 17.3 in. (43.8 cm) wide
by 3.7 in. (9.5 cm) high by 18.5 in. (47 cm) deep, and weighs 21 lbs. (9.5 kg).
Power Supply Chassis. Each power supply chassis measures 17.3 in. (43.8 cm)
wide by 3.7 in. (9.5 cm) high by 17.3 in. (43.8 cm) deep, and weighs 31 lbs.
(14 kg).
Left/Right Channel Orientation
Evolution Two preamplifier channels are assembled as left or right channels.
Preamplifier RCA connectors (31, 36, 38, 40) are color coded. Left preamplifier
channels are assembled with white RCA connectors, and right preamplifier chan-
nels are assembled with red RCA connectors.
To Remove the Preamplifier Channel
from the Shipping Carton
1. Open a shipping carton and remove the top layer of foam. You see these
items:
1 Evolution Two preamplifier chassis
1 Evolution Two power supply chassis
1 AC Power cord
1 12-pin DC cable
1 RJ-45 control cable
1 remote control
2 AAA-size 1.5 Volt batteries for the remote
1 T-10 Torx wrench for the remote control
1 packet containing the owner’s reference and warranty card
SECTION
TWO
continued